RAGE3255mm TCT Multipurpose Sliding Mitre Saw

  1. Power Tools
  2. Pro Range
  3. RAGE3

RAGE3

VIDEO

255mm TCT Multipurpose Sliding Mitre Saw

Buy Now

Available exclusively at Canadian Tire.

Scroll down to learn more.
Evolution RAGE3 Sliding Mitre Saw
255mm Multipurpose TCT Blade Supplied
Multipurpose Cutting
Cut Steel
Cut wood, even with embedded nails
300mm x 75mm Cutting Capacity
Laser Guided Accuracy
Instant Workable finish
Optional Diamond Blade cuts stone, ceramics, brick and more

Available exclusively at Canadian Tire.

  • Multipurpose Cutting Technology
  • 2000W Powerful Hi-Torque Motor with Soft Start
  • 300mm x 75mm Cross Cut Capacity
  • Fast & Easy Blade Change
  • 3 Years Limited Warranty

Utilising patented Evolution RAGE® multipurpose cutting technology, this sliding mitre saw is optimised to cut mild steel, non-ferrous metals, wood, even wood with embedded nails and plastic with a single blade. No blade changes = Faster work!

It is safer, faster and more economical than abrasive metal cutting saws - when cutting mild steel the saw produces no heat, no burrs and virtually no sparks. The cuts are clean and cool to touch, creating an instant workable finish.

Play Video Buy Now
**Evolution's internal test data.

Useful Links

Read Reviews
Cross Cut

CROSS CUT

300mm x 75mm
Mitre Cut

MITRE CUT

210mm x 75mm
Bevel Cut

BEVEL CUT

300mm x 40mm
Compound Cut

COMPOUND CUT

210mm x 40mm

YouTube Reviews

See more on Youtube
MULTIPURPOSE CUTTING

MULTIPURPOSE CUTTING

Utilising patented professional RAGE® technology; easily cuts Mild Steel, Aluminium, Wood (even wood with nails) and Plastic, using just one blade.
MULTIPURPOSE CUTTING

VIRTUALLY NO SPARKS

When cutting Mild Steel, it leaves an instantly workable finish, producing no heat, no burr and virtually no sparks - unlike alternative methods (above).
MULTIPURPOSE CUTTING

SLIDE ACTION FOR CUTTING

Compound tilt and slide mechanism, for long
angled cuts, offers a solution to almost all
common applications.
MULTIPURPOSE CUTTING

HOLD-DOWN CLAMP

Features an ultra-secure top clamp, plus tall fence which provides essential support for work-pieces.
MULTIPURPOSE CUTTING

LASER GUIDED ACCURACY

Laser guidance for optimum accuracy. Other features include a robust outer casing which enhances durability.
MULTIPURPOSE CUTTING

SLIDING TILE CUTTER

Optional diamond blade transforms this saw into a sliding tile cutter! Optional accessories include the Mitre Stand, Clamp, Extension, Repeat Stop & Dust Bag.
Type of Cut Max Width Max Depth
Cross Cut (0° x 0°) 300mm 75mm
Bevel Cut (0° x 45°) 300mm 40mm
Mitre Cut (45° x 0°) 210mm 75mm
Compound Cut (45° x 45°) 210mm 40mm
Cutting Steel
Mild Steel Plate - Max Thickness 6mm
Mild Steel Box Section - Max Wall Thickness 4mm
Motor (120V ~ 50 Hz) 2000W
Speed No Load 2500min-1 / rpm
Weight 17.7 kg
Dust Port Diameter 35mm
Cable Length 2m
Max. Mitre (Left - Right) 45° - 45°
Max. Bevel (Left) 0° - 45°
  255mm Multipurpose Blade
  RAGE3 Workpiece Clamp
  6mm (Blade Change) Allen Key
255mm Diamond Blade

255mm Diamond Blade

Size: Max. Speed: Bore: Kerf: No. of Teeth:
255mm 6150 min-1 25.4mm 2.4mm 0
Learn More
255mm Multi-Material Blade

255mm Multi-Material TCT Blade

Size: Max. Speed: Bore: Kerf: Teeth:
255mm 3250 min-1 25.4mm 2mm 28
Learn More

Click on the question to see the answer.
The saw is not cutting at the correct angles.
Check the blade for damage. If blade is not parallel in the table cutting slot, the bevel block will require adjustment. See the manual for further instructions.
How do you loosen the blade fixing bolt?
It is a left-handed thread, turn in a clockwise direction.
What do I do if the machine has stopped or there is no power.
Check to see if the laser light works, if yes, first remove the power supply from the mains and check the carbon brushes inside the motor housing. Remove the carbon brushes and clean with a dry cloth and then refit. Plug the power supply back into the mains and retry. If the machine still has no power, then it’s most likely to be the printed circuit breaker at fault. If the laser light is not working, check the fuse in the plug is fitted correctly and check the power cable for continuity.
How do I safely cut steel?
Watch a video on how to safely cut steel with this saw here.
What should I do if the blade stops spinning when cutting?
• If the motor still runs and sounds normal remove the blade and refit.
• The gearbox is possibly faulty and may need repairing.
• If the motor still runs but sounds noisy a new armature and gearbox may be required.
• If the full machine shuts down in the middle of cutting, this may be due to a damaged blade, which will cause an overload and the electrics will shut the machine down. Replace the blade.
The head of the machine will not pull down or the blade guard will not return.
Check the guard linkage is still connected and working - See the operator’s manual. Check that the head max height screw is tightened up correctly and not missing.
What materials can this saw cut?
When fitted with an Evolution 255mm Multipurpose TCT blade this machine can be used to cut: Wood, Wood derived products (MDF, Chipboard, Plywood, Blockboard, Hardboard etc), Wood with embedded nails,  mild steel box section with 3mm wall at HB 200-220, 6mm mild steel plate at HB 200-220, Copper, Plastic and many more materials. Note: Wood containing non galvanised nails or screws, with care, can be safely cut.  Note: For cutting stainless steel we recommend Evolution dedicated stainless steel blades. Please read all safety warnings and instructions in the operators manual included with the machine. 
Watch a video on how to safely cut steel with this saw here.

 

Not found the answer you were looking for? Contact Us

Useful Links


Warning: include(../../../../php/templates/footers/footer_us.php): failed to open stream: No such file or directory in /home/power/public_html/ca/build/mitresaws/rage3/index.php on line 84

Warning: include(): Failed opening '../../../../php/templates/footers/footer_us.php' for inclusion (include_path='.:/opt/cpanel/ea-php72/root/usr/share/pear') in /home/power/public_html/ca/build/mitresaws/rage3/index.php on line 84