Utilising patented professional RAGE® technology; easily cuts Steel, Aluminium, Wood (even wood with nails) and Plastic, using just one blade.
VIRTUALLY NO SPARKS
When cutting Steel, it leaves an instantly workable finish, producing no heat, no burr and virtually no sparks - unlike alternative methods (shown above).
4x faster than abrasive saws* with an instantly workable finish which means no filing or grinding before the steel can be used.
Evolution blades last longer than abrasives meaning a lower cost per cut* and do not wear down meaning no loss of depth-of-cut.
0-45° SECURE CLAMP
Fast action swivel clamp enables cuts to be made from 0-45°. Other features include a hi-torque gearbox which reduces motor stresses, improving performance and durability.
OPTIONAL DIAMOND BLADE
Don’t Forget: Evolution’s accessories include the 355mm (14”) Diamond Blade available for cutting Stone, Concrete and Brick.
*Evolution Internal Test Data.
|Type of Cut
|Cross Cut (mild steel) (0° x 0°)
|Cross Cut (mild steel) (0° x 45°)
|Cross Cut (wood) (0° x 0°)
|Cross Cut (wood) (0° x 45°)
|Square Tube Cut (0° x 0°)
|Square Tube Cut (0° x 45°)
|Round Tube Cut (0° x 0°)
|Round Tube Cut (0° x 45°)
|Mild Steel Plate - Max Thickness
|Mild Steel Box Section - Max Wall Thickness
|Motor (230-240V ~ 50 Hz)
|Motor (110V ~ 50 Hz)
|Speed No Load
||1450min-1 / rpm
|Max. Angle Cut
Click on the question to see the answer.
Can you fit a dust bag?
A dust bag cannot be fitted to this machine.
Can a dust extraction be fitted?
Dust extraction cannot be fitted to this machine.
Can you fit a diamond blade?
Yes if the blade spec is 355mm in diameter, 25.4mm Bore, Max 2.4mm Kerf, Dry cutting.
Can it cut stainless steel or cast iron?
No. Use only on mild steels.
Can you fit an abrasive disc?
The gearbox and motor speed in Evolution saws are optimised for cold cutting, and are not suitable for use with abrasive discs.
The motor is running but the blade is not turning and is stopping under load.
The armature and first gear drive will be damaged or the Drive spindle woodruff key will be damaged. Please contact our customer service team
for required replacement parts.
How do I cut metal safely and correctly?
Watch a video on how to safely cut steel here
How do I remove and install a new blade?
Only carry out this operation with the machine disconnected from the mains supply. For full instructions on how to replace the blade, please refer to the operators manual supplied with the machine or click here to view the
Not found the answer you were looking for?