Evolution US - RAGE2 Chop Saw FAQS

#	Question	Answer	What to do…
#1	Where can I find the cutting capacities?	A. See specification page in the operator's manual. B. Go to product webpage.
#2	Can you fit a dust bag?	A. A dust bag cannot be fitted to this machine.
#3	Can a dust extraction be fitted?	A. A dust extraction cannot be fitted to this machine.
#4	Can you fit a diamond blade?	A. Yes if the blade spec is 355mm in diameter, 25.4mm Bore, Max 2.4mm Kerf, Dry cutting.
#5	Can it cut stainless steel or cast iron?	A. No. Use only on mild steels.
#6	Can you fit an abrasive disc?	A. No the motor RPM is incorrect for abrasive discs.
#7	The saw is cutting at 90 degrees.	A. Check that the pivoting plate and base is not damaged.	A. If in warranty please contact our customer service team for required replacement parts.
#8	The motor is running but the blade is not turning and is stopping under load.	A. Armature and first gear drive will be damaged. B. Drive spindle woodruff key will be damaged.	A / B. If in warranty please contact our customer service team for required replacement parts.
#9	The home fuses are tripping.	A. If RCD / MCB are fitted check that they are the correct size and type for high surged startingis not damaged. B. If fuse in plug and trips blow. C. Check blade for damage, this will cause overloading.	A. See a qualified electrician (32Amp 'D' type trip) B. Send to a qualified repair centre to have a PAT test carried out. C. If in warranty please contact our customer service team for required replacement parts.

Evolution RAGE2: 355mm Multipurpose Chop Saw FAQs